dfgdfg

　　At 9: 00 a.m. on July 4, Chongqing Water Conservancy Bureau released a message saying that according to the monitoring of Chongqing Hydrological Monitoring Station, from 8: 00 on July 3 to 8: 00 on July 4, there was heavy rain in most parts of Chongqing, and local heavy rain was extremely heavy, Wanzhou, Kaizhou, Yunyang, Fengjie, Wushan, Wuxi, Chengkou, Fuling, Fengdu, Dianjiang, Zhongxian, Jiangbei, Nan ‘an and Qixian. Among them, there were heavy rains in 16 counties such as Kaizhou, Yunyang, Fengjie, Wushan, Wuxi, Fuling, Fengdu, Zhongxian, Qijiang, Banan, Changshou, Jiangjin, Yongchuan, Nanchuan, Wansheng and Shizhu, and there were heavy rains in Wanzhou. The maximum daily rainfall occurred in Baiyan Village, Changtan Town, Wanzhou, which was 251.5 mm.

　　Affected by rainfall, 10 rivers, such as Lvzi River and Sunxi River in jiangjin district, Tonghui River and Qingxi River in Qijiang District, Youjiang River in Fuling District, Jiagao River and Zhuyi River in fengjie county, Wuqiao River, Modaoxi River and Jiannan River in Wanzhou District, exceeded the police limit, among which 3 rivers, such as Sunxi River in jiangjin district, Wuqiao River in Wanzhou District and Zhuyi River in fengjie county, exceeded the police limit. As of 8: 00 today, seven rivers, including Lvzixi in jiangjin district, Jiagao River in fengjie county, Jiannan River and Modaoxi in Wanzhou District, Tonghui River in Qijiang District, Qingxi River and Youjiang River in Fuling District, are still over-protected, while Sunxi River in jiangjin district is still over-protected, and the rest have fallen below the warning water level; The remaining 75 small and medium-sized rivers, such as Daxi River in Nanchuan District and Meixi River in fengjie county, experienced the process of 1-8 meters flood, and the highest water level did not exceed the warning water level.

　　There is heavy rain and local heavy rain in Qujiang River Basin in Sichuan, moderate to heavy rain in Jialing River and Fujiang River Basin, local heavy rain, and basically no rainfall in Qiongjiang River Basin. There is basically no rainfall in Wujiang River Basin in Guizhou. Affected by rainfall, the highest water level at Luoduxi (II) Station in Qujiang River was 215.11 meters at 19: 00 on the 3rd, and the corresponding flow rate was 11,800 cubic meters per second, which was 3.89 meters lower than the warning water level (219.00 meters) and 2.56 meters higher than that at 8: 00 yesterday. At 6 o’clock on the 4th, Beibei (III) Station of Jialing River had the highest water level of 186.74 meters, and the corresponding flow rate was 14,600 cubic meters per second, which was 7.76 meters lower than the warning water level (194.50 meters) and 6.02 meters higher than yesterday’s 8 o’clock. The water potential of the main control stations of other rivers was basically stable, and there was no obvious water rising process.

　　At 8 o’clock today, the water level at Cuntan Station of the Yangtze River was 167.97 meters (Wusong elevation, corresponding to the Yellow Sea elevation water level of 166.48 meters), which was 12.53 meters lower than the warning water level and the water potential rose. The water level of Beibei (III) Station of Jialing River is 188.33 meters (Wusong elevation, corresponding to the Yellow Sea elevation of 186.74 meters), which is 7.76 meters lower than the warning water level (Yellow Sea elevation) and the water level is flat; The water level of Wulong Station in Wujiang River is 173.16 meters (Wusong elevation, corresponding to the Yellow Sea elevation of 171.52 meters), which is 19.84 meters lower than the warning water level, and the water potential falls.

　　The water conservancy department is expected to be at 8: 00 on the 4th — At 8 o’clock on the 5 th, some small and medium-sized rivers in western and northeastern Chongqing may have different degrees of water rising; 8: 00 on the 5th — At 8 o’clock on the 6 th, the water potential of small and medium-sized rivers in Chongqing was basically stable, and there was no obvious water rising process; 8: 00 on the 6th — At 8 o’clock on the 7 th, some small and medium-sized rivers in central Chongqing may have different degrees of water rising.

　　(General Station reporter Wu Liming Zhan Sheng)

1905 movie network news On March 22nd, a feature film was released by the film directed and starring.At present, the film is being shown all over the country, which has won the audience’s super-high reputation: "the best film in 2021 so far", "constant tension, constant jokes and cruelty" and "absolutely need two brushes. Many details are worth tasting. " Buy tickets immediately and feel the thrilling survival test.

Make up a nonexistent language for survival.　

Behind every word is a life.

During World War II, Giles (Nahuel Pérez Biscayart), a Jew, was arrested and sent to a German concentration camp. He lied that he was a Persian to save his life and escaped being shot. Although this lie saved him temporarily, Gilles was taken by German officer Koch (Lars Eidinger) and asked to teach him Persian. Gilles, who knows nothing about Persian, can only make up a language out of thin air. He can only make up the word "Persian" in fear every day to survive.

Koch’s protection of Gilles aroused another SS guard (Jonas Nay)’ s suspicion of Gilles. During his life in a concentration camp of more than 700 days, Gilles passed away from death every day. How long can this language, which only two people know, help Gilles hide? The film is full of tension and people can’t help but hold their breath.

In the exposed feature film, Giles, a Jew, lied that he was a Persian. After 700 days in the concentration camp, all the Jews who survived in the concentration camp were about to be slaughtered. The German officer Koch took him out of the concentration camp and let him live. Then Giles was saved by the Allies. In the allied tent, Gilles, who no longer calls himself Reza, told the allied officers that although all the files in the concentration camp had been destroyed, he still remembered the names of some victims. Under the gaze of the gathering crowd, he read out the names of those "nobody" one by one in the uncontrollable SOB.

High score, high energy and high reputation　

The whole network strongly recommends creating ultra-high heat

The film Farsi Course was adapted from a real event. In August, 2020, the film was selected as the official recommendation unit of the 10th Beijing International Film Festival and held the Asian premiere. It was hard to find a ticket for the only offline screening that sold out in 5 seconds. Previously, after the world premiere of the film at the Berlin Film Festival, it gained a lot of praise from overseas media. Today, Persian Course still maintains a high score of 8.3 in Douban, and is called a must-see movie by countless fans.

In Persian class, Giles, a Jew, used the names of 2840 compatriots to accuse the evidence of war. The film does not show cruelty with a lot of war scenes, but the words "Persian" can directly hit the hearts of every audience. Immediately after the film was released, it aroused enthusiastic response on all major platforms, with the recommendation rate of Big V as high as 92%, and the score of Cat’s Eye and Taobao Film as high as 9.3, which was highly recommended by many filmmakers and film critics.

The professional film media commented that "a film that can’t be missed in the cinema recently", and the audience also said that "the emotions are restrained and shocking" and "a film that hits the soul directly". The film was not shortlisted for the best international film award because it failed to meet the requirements of applying for the country, which is the biggest legacy of this year’s Oscar. However, the film has been recognized by audiences at home and abroad, which is enough to make it one of the must-see foreign language films this year.

　　Sitting in the driver’s seat of this speed machine, what you can see completely subverts the previous understanding of the interior of super sports cars. All the buttons that can be omitted are omitted from CCR’s center console. However, the more important functions are still preserved, and the styles of function buttons are relatively novel. A circle of round metal buttons is very similar to old-fashioned telephone buttons.

　　The CCR steering wheel is very simple, which is an ordinary steering wheel wrapped in leather, because although the multi-function steering wheel is very practical, the buttons on the steering wheel will definitely become cumbersome for ultra-high-speed driving or driving on the field. CCR’s gear handle is also very ingenious. The height of the gear lever is much higher than that of a normal car, so it must be designed for the convenience of the driver. This manual 6-speed forward gearbox is provided by Cima, which also designs for F1 racing cars. The speed ratio of the rear group of the gearbox they designed for CCR can make the car reach about 400 km/h at 7300 rpm.

　　How is it possible to lose carbon fiber material in a super sports car? Although CCR’s center console does not use carbon fiber material, it is wrapped in frosted leather instead. However, we still see the carbon fiber material at the air outlet of the air conditioner, which can still play a certain decorative role in the car.

　　K? nigsek CCR’s seats are very particular. According to the data, K? nigsek CCR’s seats are specially designed, which can meet the needs of daily driving and meet the requirements of high-speed competition. Ergonomics experts from Koenigsegg Automobile Company equipped this carbon fiber seat with Tempur material developed by NASA. This material is made of 100% polyurethane, which was first developed by NASA for aerospace projects. It is very effective in buffering pressure and weight. When the heat and weight of human body are applied to the seat, the pressure will be evenly distributed immediately to prevent the pressure on the protruding parts of human body from increasing. In Europe, mattresses, pillows and back cushions made of Tempur materials are widely used in hospitals and are the best materials for operating tables. Moreover, the seat of Koenigsegg CCR can be adjusted in many directions.

The following is quoted from the network:

　　The engine base of CCR comes from a 4.7-liter V8 engine that was once used in the world. If it is not modified, it will be around 300 horsepower. The key to the promotion is to install a device from Lysholm, a Swedish professional supercharger manufacturer, with a maximum pressurization value of 1.4 bar, which is like giving an ordinary athlete a stimulant and immediately getting excited. Such an engine drive only has a body weight of 1180 kilograms (about the same), which is unimaginable. The specially developed Swedish Lysholm double-screw compressor and the exhaust system made of titanium are also factors to help it improve its power.

Summary:

　　For such a rare speed machine in the world, all we can do is to worship. It has become unrealistic to hope to own such a super sports car with one of the highest speeds in the world so far. How many people can spend 15.8 million to buy a car? (At least I didn’t have the chance)

---

Brand history: (quoted from the Internet)

　　Koenigsegg is a brand specializing in the design and production of super sports cars. Its founder is a Swede, and his name is Christian von Koenigsegg. He had a dream of making his own super sports car since he was a child, and with his gradual success in his career. In 1994, at the age of 22, he finally established Koenigsegg Automobile Company.

　　Two years later, the first prototype CC was born. In this process, Christian received great assistance from the company. In addition to providing funds, Volvo also provided the wind tunnel laboratory for Christian to use, and the first batch of loading engines were provided by Volvo’s parent company Ford, but Koenigsegg added a supercharged system on this basis.

　　After the start, Koenigsegg began a series of dazzling performances on the world stage: he appeared at Cannes Film Festival in 1997, the first production car CC8S premiered at Paris Motor Show in 2000, released CCR in 2004, CCX in 2006 and CCX in 2008. In 14 years, Koenigsegg has grown from nothing, from obscurity to becoming an influential sports car manufacturer in the world. In this process, the world record set in 2005 is undoubtedly the most surprising chapter for the industry.

　　On February 28th, 2005, at the Nardo circuit in Italy, Koenigsegg CCR ran an amazing speed of 387.9 kilometers per hour, which broke the world record of 386.7 kilometers per hour set by McLaren F1 in 1998, and CCR became the fastest production car in the world at that time. Although this record was later broken by Bugatti, is the research and development strength of Bugatti’s parent company’s car comparable to that of a small factory like Koenigsegg? Therefore, it is an honor for CCR to set a world record.

　　[Global Times reporter Yuan Jirong] In order to suppress and contain the rising China science and technology and safeguard American hegemony, Washington has increasingly turned to the core of the digital economy — — In the field of chips. On August 15th, the US Department of Commerce implemented export control on EDA software known as "the mother of chips". Previously, the United States had promulgated the Chip and Technology Act of 2022 (hereinafter referred to as the "Chip Act") on July 28th. The purpose of this bill is to cut off the supply of advanced technology, equipment and materials for chip manufacturing to China, accelerate the return of the chip industry to the United States through subsidies, cut off the contact between China’s chip industry and the world, and reshape the supply chain pattern of the global chip industry chain. Obviously, this is a wishful plan of the United States. So how many "devils" are hidden in the "Chip Act" of the United States? Our reporter conducted an interview and investigation.

　　In the five sub-chains, where do Chinese and American enterprises occupy?

　　The main contents of the "Chip Act" in the United States include three items: one is to provide 52.7 billion US dollars of financial support to the semiconductor industry; The second is to provide enterprises with a 25% investment tax credit of about $24 billion; The third is to allocate about 200 billion US dollars to support cutting-edge technologies such as artificial intelligence, robotics and quantum computing. The United States is trying to attract enterprises to set up factories in the United States, so as to concentrate the advanced process (below 28 nm) chip manufacturing industry in the United States, to confront China’s challenges in the semiconductor field, and to safeguard the technological hegemony of the United States. According to industry data, in 1990, the United States accounted for 37% of the global semiconductor manufacturing industry, and in 2020, this proportion dropped to 12%.

　　In the related statement issued by the White House, the purpose of the "Chip Act" includes reducing costs, creating jobs, strengthening the supply chain and so on, so as to compete with China. To this end, the bill requires the establishment of four funds: the "American chip fund" totals 50 billion US dollars, of which 39 billion US dollars is used to encourage chip production and 11 billion US dollars is used to subsidize chip research and development; The "US Chip Defense Fund" has a total of 2 billion US dollars to subsidize the production of key chips related to national security, which will be allocated by the US Department of Defense in stages from 2022 to 2026; The "American Chip International Technology Security and Innovation Fund" has a total of 500 million US dollars to support the establishment of a safe and reliable semiconductor supply chain; The "American Chip Labor and Education Fund" has a total of 200 million US dollars to cultivate talents in the semiconductor industry.

　　As the largest chip market in the world, China consumes about 3/4 of the chips in the world. But in the global chip industry chain, China is in the middle and lower reaches. Chip industry has its unique internal structure and industrial characteristics, and its industrial chain is divided into five sub-chains. The first is design. The largest chip design company in the world is ARM in Britain, EDA in the United States occupies a monopoly position in software design, and the design capability of Huawei Hisilicon can reach 7 nanometers. The second is manufacturing, including finished products and semi-finished products. Among them, semi-finished products generally refer to wafers, and high-purity wafers are basically monopolized by Japanese companies; Chip products are made on the basis of wafers, and the international output of SMIC is currently the fifth in the world. The third is packaging testing, which is basically labor-intensive, and the gap between China and the world is not big. The fourth is equipment production. The most sophisticated EUV mask aligner is ASML, the Netherlands, which is the only enterprise that can provide 7 nm process mask aligner. The equipment manufacturers that produce wafers are mainly in Japan, and companies such as Mitsubishi and Sony are dominant. Shanghai Microelectronics has been able to produce equipment for making 28 nm chips. The fifth is auxiliary materials. Including photoresist, mask, target, packaging substrate, etc., these materials are still facing bottlenecks in China enterprises.

　　Geng Bo, deputy secretary-general of the Third Generation Semiconductor Industry Technology Innovation Strategic Alliance, told the Global Times reporter that "the layout of key patents involving upstream advanced process technology, some key raw materials, equipment and spare parts consumables is still not perfect". At present, there is a severe trade deficit in China’s integrated circuit industry, and some high-end chips are not completely self-sufficient. Take memory chips as an example. At present, American products account for half of the global market, South Korea accounts for about 25%, Japan accounts for 10%, Europe accounts for 8%, and China accounts for 3%.

　　Killing is mainly in the manufacturing process.

　　Recently, IC Insights, a well-known semiconductor research institution, released a report. In 2021, the chip scale consumed in China was about 186.5 billion US dollars, but the chip manufactured in Chinese mainland was only 31.2 billion US dollars, accounting for only 16.7%. The "Chip Act" of the United States mainly focuses on the following aspects, with the intention of strangling China’s chip industry in its infancy.

　　First, the technology, equipment and materials below 28 nm are blocked from China. Han Xiaomin, general manager of Jiwei Consulting, told reporters that the restrictions of the chip bill are mainly reflected in two aspects: First, supply chain resources such as equipment and materials related to advanced manufacturing are continuously prohibited from being given to local enterprises in China, and the research and development progress of China enterprises in the field of advanced manufacturing is suppressed; Second, chip companies supported by the Chip Act are required not to invest in advanced technology in Chinese mainland and continue to split the China market and the global supply system. Although the restrictions of the "Chip Act" mainly start from the manufacturing link, it will cooperate with a series of other restrictions. For example, EDA tools involving GAA process have just been banned from being used by China enterprises recently; Restrict American companies from providing China with the equipment needed to manufacture advanced chips; Pressure the Dutch government to ban ASML from selling deep ultraviolet mask aligner to China.

　　Secondly, through subsidies, it is forbidden for companies receiving US federal funds to significantly increase production of advanced process chips in China for a period of 10 years. Companies that violate the ban or fail to correct the violation may need to refund the federal grant in full. According to the BBC, in the past, all American equipment manufacturers received a letter from the US Department of Commerce, informing them not to supply China with equipment for manufacturing chips of 14 nanometers or less. Tim Archer, chairman and CEO of American chip equipment manufacturer Panlin Semiconductor, said at the latest financial report that the scope of US technology export control to China will be further extended to foundries that produce chips below 14 nanometers.

　　Before and after the "Chip Act" was signed, under the high-pressure atmosphere, many American semiconductor companies have announced that they will expand their investment in their own country. On August 9th, Micron announced that it will invest 40 billion dollars to make chips in the United States by 2030, and this action will be supported by the Chip Act. Reuters reported on the 8th that Qualcomm has agreed to purchase an additional $4.2 billion worth of semiconductor chips from Gexin’s new york factory, bringing its total purchase to $7.4 billion by 2028.

　　Finally, we should promote the establishment of the "Four-Party Alliance of Chips" to further restrict the development of chips in China. This is a chip industry alliance between the United States, Japan, South Korea and Taiwan Province, which is intended to monopolize the high-end chip industry. It wants to integrate the chip manufacturing industry of American allies and set up a chip supply chain in the United States to exclude competitors.

　　China’s Countermeasures

　　Industry experts believe that in the short term, the "Chip Act" involves high-end OEM of advanced manufacturing technology, and memory has a great impact on China. However, in the long run, it is the consensus of domestic industry to carry out localization in related fields, and the restrictions of the bill can only accelerate this process. Geng Bo said that the upstream semiconductor equipment and materials will benefit from the continuous expansion of production and the acceleration of localization in China Wafer Factory. In view of the macro-policy blessing of localization and the uncertainty of international situation and supply chain security, China semiconductor industry should do a good job in top-level design and overall layout, increase policy support, strengthen international cooperation outside the United States, enlarge and strengthen the head enterprise, increase the training of industry talents and discipline construction, and strive to establish a certain closed-loop supply capacity in the industrial chain to prevent the recurrence of "core shortage tide".

　　At the same time, for the United States, relying on a "chip bill" cannot reshape the glory of the local chip industry, and it is even more difficult to rebuild the manufacturing industry chain. Some industry experts said that the global "chip shortage" has been gradually eased this year, and there has even been a surplus in chip production, and many chips are being sold at reduced prices. This means that the chip industry is not a promising industry at least for the moment. Market investors are also confirming this judgment. After the release of the "Chip Act", the share prices of major semiconductor companies in the United States fell due to the decline in demand for early warning in the industry.

　　Han Xiaomin said that the "Chip Act" can alleviate the strategic anxiety of the United States by attracting leading enterprises to set up factories in the United States through subsidies. However, it is not optimistic that the United States will truly become an advanced technology manufacturing base. Some experts believe that although China has not broken through the high-end chip manufacturing technology for the time being, it has chip factories accounting for half of the world’s total, and the "Chip Act" of the United States will promote Chinese enterprises to break through the technology. The domestic manufacturing industry in the United States is hollow and lacks talents, and it is impossible to form independent chip production capacity in a short time. According to the estimation of the Boston Consulting Group and other institutions, if the United States adopts the policy of "hard decoupling technology" from China, it may cause American semiconductor enterprises to lose 18% of the global market share and 37% of the revenue, and reduce 15,000 to 40,000 high-skilled jobs. This is tantamount to luring domestic enterprises away from the China market with a drop in the bucket subsidy.

Special topic: Wenchuan earthquake in Sichuan

　　　　At 19 o’clock on May 21st, after learning that there was a blue tent for disaster relief at the intersection of Beisen South Road and Beishuang Street in Chengdu, the words "for disaster relief" printed on it had been covered with blue paint, the police of Dongpo police station immediately joined the staff of the sub-district office, rushed to the scene for investigation and took photos to collect evidence. Besieged, abused and beaten by a few people with ulterior motives.

　　　　At about 23 o’clock that night, there was such a rumor: the special tent for disaster relief was built by the female police of Dongpo police station, and she was still drinking and playing mahjong in the tent in the afternoon.

　　　　At 23: 30 that night, Qingyang District Public Security Bureau successively arrested 11 criminal suspects including Li Bogen who participated in the siege, abuse and beating of the police. After examination, Li Bogen and others confessed to the illegal facts of spreading rumors, besieging, abusing and beating police and office staff.

　　　　At about 16: 00 on May 22, the police arrested He Chuan, an illegal suspect who spread rumors of "police beating innocent citizens" on the Internet, and seized his tools and materials used to spread rumors on the Internet.

　　　　After examination, He Chuan confessed to the illegal facts of publishing false rumors and beating the police on the Internet. (Reporter Ma Limin)

Editor: Zhang Renhe

After busy work, it is a pleasant thing to hold a favorite snack and start the drama-chasing time. Who is the boss behind the scenes? When all the details point to an answer that comes to the fore, the dialog box "Want to watch the whole play, please buy a member/VIP" pops up on the screen …

Is there a feeling of deja vu in such a scene? Coincidentally, some netizens have bought members, but they are stuck in the middle of the series by VIP qualification, which is really uncomfortable. When I upgraded to be a VIP member, I wanted to "watch first", but I was blocked by the single episode unlocking function of "VVIP". When I want to watch another episode, I have to pay for it again. However, the days of VVIP are not better, and the money is spent one by one, but the dreamy dialog box still appears as scheduled: "Sorry, you have reached the maximum number of unlocked episodes today! See you tomorrow! "

When the drama was in full swing, it came to an abrupt end, so blunt and unreasonable.

This is something that really happens in our lives. Many Internet video playback platforms have designed similar viewing rules. I bought members, VIPs, VVIP, and VIP for life … Some video websites are like rogue software in the early years, with endless sets of middle sets, chain sets and fancy sets, so I don’t believe I can’t cover you! Of course, some video playback platforms play word games, so you can’t discuss it. However, the ultimate goal is to let users continue to pay repeatedly in order to continue watching film and television works. Although the payment amount does not seem unbearable, these video playback platforms are really ugly and annoying.

As a video website that holds all kinds of film and television copyright resources, membership system is one of the ways to make profits. By becoming a member, users get the rights of advertising and watching exclusive film and television works, and the supply and demand sides of the transaction choose voluntarily, which is a payment method recognized by consumers. However, the constant demand for extra payment is actually depriving users of the right to choose in the name of the choice of consumption mode. Using the existing popular film and television works to bundle and sell a variety of paid items not only ignores the needs of consumers, but also blatantly infringes on consumers’ rights and interests. In the short run, profits have increased, but in the long run, it is to kill the goose to get the egg and overdraw the trust of users.

Good content will always have a market, but you can’t forget the rules. I think that I am the only one, monopolizing the market of popular dramas, blindly seeking profits and quick success, and cutting leeks and bonus hunter in fancy round after round, which will kill the audience’s trust and will surely lead to fire.

Beijing Zhengban made [2023] No.17

District People’s governments, municipal government commissions, offices and bureaus, and municipal institutions:

　　"Beijing Robot Industry Innovation and Development Action Plan (2023-2025)" has been approved by the municipal government and is hereby issued to you, please implement it carefully.

General Office of Beijing Municipal People’s Government　　　　

June 16, 2023　　

Beijing Robot Industry Innovation and Development Action Plan (2023-2025)

　　This action plan is formulated in order to implement the Development Plan of Robot Industry in the Tenth Five-Year Plan of the Ministry of Industry and Information Technology and the Development Plan of High-tech Industry in Beijing during the Tenth Five-Year Plan, seize the opportunity of a new round of global scientific and technological revolution and industrial transformation, accelerate the innovation and development of robot industry in this city, and build a highland of global robot industry.

　　I. General requirements

　　(A) the guiding ideology

　　Guided by the Supreme Leader’s Socialism with Chinese characteristics Thought in the New Era, we will fully implement the spirit of the 20th Party Congress, adhere to high-level scientific and technological self-reliance, closely follow the development trend of robot intelligence, bionic and modularization, accelerate the creation of a "Beijing model" for the development of robot industry with product innovation and scene demonstration, ecological optimization and industrial synergy, make every effort to build a global robot technology innovation source, application demonstration highland and high-end industrial cluster, and effectively support the construction of an international scientific and technological innovation center and a global digital economy benchmark city.

　　(II) Main objectives

　　By 2025, the innovation ability of the robot industry in this city will be greatly improved, and 100 kinds of high-tech and high value-added robot products and 100 kinds of application scenarios with national promotion value will be cultivated. The number of robots with 10,000 people will reach the world’s leading level, forming an active development ecology with innovative elements and innovation and entrepreneurship. The income of the robot core industry in the city has reached more than 30 billion yuan, creating a leading domestic and international advanced robot industry cluster.

　　Second, high-end leading, focusing on the development of robot "1+4" product system

　　Focusing on the world’s cutting-edge technology and future strategic needs, we will step up the layout of humanoid robots, promote the leap development of four types of superior robot products: medical health, cooperation, specialty and logistics, implement hundreds of new robot projects, and create an innovative product system with intelligent drive, integration of production and research, and openness and leadership.

　　(A) step up the layout of humanoid robots

　　Benchmark the international leading humanoid robot products, support enterprises and universities to carry out research and engineering of humanoid robot products and key components, accelerate the construction of Beijing humanoid robot industry innovation center, and strive to become a national manufacturing innovation center. With the goal of small-scale production and application of humanoid robots, we will create basic conditions such as general intelligent underlying software and interfaces, general hardware development supporting facilities, focus on breaking through key technologies such as general prototype of humanoid robots and general artificial intelligence model, and vigorously promote the development and application of open source control systems, open source chips, open source simulation software, etc. Taking 3C electronic manufacturing, new energy vehicle production, security emergency and other typical scenarios as the traction, we will support upstream and downstream enterprises in the industrial chain to jointly carry out product research and production line construction through "revealing the list" and accelerate the process of autonomy of the whole industrial chain.

　　(2) Consolidate and upgrade the four dominant robots.

　　Give full play to the basic advantages of the robot industry in this city, and improve the technical level and market competitiveness of four types of robots: medical health, cooperation, specialty and logistics. In the field of medical health robots, facing the forefront of the industry and the needs of medical applications, the ability of surgical robots to assist in the whole process of surgery is improved; Give full play to the synergy of medical workers in the capital, optimize the medical device registration and health insurance policies, and increase the promotion of clinical application. In the field of cooperative robots, we will break through key technologies such as light weight, visual enhancement, force perception, compliance control and self-learning of the whole machine, improve the load capacity of the whole machine, and develop adaptive cooperative robots; Carry out complex task execution algorithm and end effector technology research, and promote the intelligent and flexible development of multi-degree-of-freedom cooperative robots. In the field of special robots, improve the stability and reliability of products such as fire fighting, security and rescue robots, optimize product design and processing technology, and reduce comprehensive costs. In the field of logistics robots, improve the navigation and operation accuracy, promote the iterative upgrade of intelligent warehousing logistics robots, develop heavy-duty mobile robots, and optimize the application environment of logistics robots.

　　Third, stabilize the chain and strengthen the chain, and strive to improve the key support ability of the robot.

　　Focus on the key links of the robot industry chain, adhere to the problem orientation, give full play to the main traction role of the whole machine enterprise chain, open up the innovative chain of upstream and downstream collaboration, soft and hard combination, enhance the basic support ability of artificial intelligence model, key core technologies of the industry, key parts and components, and promote the robot industry to stabilize, repair and strengthen the chain.

　　(A) to strengthen the support of artificial intelligence model

　　Develop and continuously improve the robot general artificial intelligence model, tap the application scene resources, provide diversified scene data support for model pre-training, and improve the universality and practicability of the model. Break through the key technology of large-scale multi-modal data fusion, and develop a large-scale model system for image, text, voice, force, heat, electricity, magnetism and other multi-modal sensing data fusion processing. According to the characteristics of various robot technologies and application scenarios, an efficient fine-tuning algorithm for large models is developed to promote the deep application of large models in the robot field. Build an open source platform for model optimization algorithm, create a large model ecosystem with extensive participation and interactive optimization of the whole industry, and promote the iterative improvement of model performance.

　　(B) Breakthrough the key core technologies of the industry

　　Tap the potential of the capital’s scientific and technological research and development resources, strengthen the strategic layout of frontier areas, and make overall plans to promote key core technologies of the robot industry. In terms of basic general technology, it breaks through the technologies of robot system design, modularization and flexible reconfiguration, and robot cloud-edge-end fusion. In the aspect of man-machine cooperation technology, three-dimensional holographic environment modeling and high-precision tactile and force sensing technologies are developed. In terms of basic software technology, the robot operating system is developed, and technologies such as general support software and simulation platform software are developed for the needs of robot research and development, manufacturing, testing and practical application. In terms of fusion and reuse technology, we will explore the development and application of new structures such as artificial muscles and electronic skin, and promote the cross-integration development of new materials, bionic technology and new manufacturing technology.

　　(3) Consolidate the foundation of key components.

　　Benchmark the international advanced level, implement the industrial base upgrading project, comprehensively improve the comprehensive performance of key parts of the robot, and strengthen the key support ability for the whole machine. As for the reducer, we should give full play to the leading role of the whole machine enterprise, develop precision reducer products with high efficiency, high power density, torque self-sensing and long-term maintenance-free, and develop new transmission products. In the aspect of servo drive system, support enterprises to cooperate with universities and colleges to develop high-power, high-precision, high-dynamic response and high-reliability servo drive system and intelligent integrated joints. In the aspect of controller, the technologies such as vibration suppression, dynamic compensation of inertia, high-speed calculation and planning of multi-joint complex motion are emphasized to improve the universality, expansibility and reliability of the controller. In terms of sensors, efforts are made to overcome advanced design, manufacturing, sealing and testing technologies, optimize technological processes, reduce production costs, and improve the accuracy, reliability and stability of sensors. As for the end effector, high-precision, high-load and multifunctional end effector is developed for typical application scenarios such as medical health and intelligent manufacturing.

　　Fourth, benchmarking, fully implementing the "robot+"application demonstration

　　Facing the key needs in the fields of medical care, manufacturing, construction, trade and logistics, pension, emergency, agriculture, etc., we will implement hundreds of application scenario demonstration projects and carry out a number of "robot+"application demonstrations to accelerate the formation of iconic scenes, iconic services, iconic models and iconic formats.

　　(A) the development of "robot+"experience mode

　　Facing the needs of medical health, smart old-age care, safety emergency and other scenarios, we will support users to jointly build a "robot+"application experience center, create a "model room" for innovative application of robots, and expand product consumption and application. Relying on the "Xinzhizhao 100" project, we will support robot enterprises to build "robot production robot" benchmark factory and "Beijing Zhizhao" experience center, and expand the depth and breadth of robot application according to the modes of mass customization, product life cycle and integrated supply chain.

　　(B) the development of "robot+"customization model

　　Focus on the needs of specific scenarios such as manufacturing, trade logistics and agriculture, support users and enterprises to form application innovation consortia, develop innovative products and system solutions for typical application scenarios through "unveiling the list" and ordering for the first time, and implement a number of major application demonstration projects. Support users to give priority to purchasing innovative products and services of robots, select and compile a catalogue of robot application scenarios, and create a cooperative innovation model for production and use.

　　(C) the development of "robot+"promotion model

　　Integrate the resources of robot enterprises, users, industry organizations and other parties, collect the needs of end users in various fields, and carry out normalized online docking services. Establish a normalized supply and demand docking mechanism in the fields of medical health, manufacturing and emergency response to promote the application of robots. Innovate the application promotion mode, strengthen the application promotion through short-term lease, shared service and agency operation, and promote new service formats.

　　Fifth, innovate services and further improve the development ecology of the robot industry

　　Around the robot R&D, design, pilot verification and other industrial links, we will speed up the construction of a number of open and shared public service platforms, comprehensively improve the allocation level of robot industry elements, and establish a new industrial development ecology of "resource planning-innovation synergy-environmental optimization".

　　(A) improve the public service system

　　1. Build a collaborative innovation carrier for the robot industry. We will promote innovative carriers such as key robotics laboratories and engineering research centers to become better and stronger, and support enterprises and universities to form Industry-University-Research-used consortia. Improve the operational service level of Beijing Medical Robot Industry Innovation Center, give play to the role of medical device commissioned research and development processing platform (CDMO), and promote the rapid transformation of innovation results. Support intelligent robots and system high-tech innovation centers to solve common technical problems such as multi-mode perception and autonomous control through the mode of "enterprise giving questions and innovation center answering questions". Support the construction of robot standardization organizations, implement standards and norms to lead the project, continue to promote robot standardization, speed up the research and formulation of standards such as common technical requirements and general product specifications, and promote the transformation of robot innovation achievements in this city into standards.

　　2. Build a platform for robot pilot verification and inspection. Support enterprises to build a robot pilot verification platform in conjunction with colleges and universities, and provide services such as pilot curing, engineering development, sample trial production, data simulation, scene application, process improvement, etc., to meet the design and processing needs of prototypes and small batch production. Promote the construction of robot supporting processing centers and shared factories in a market-oriented way, and form service capabilities such as precision machining and batch manufacturing that can quickly respond to the needs of enterprises. Support the construction of national robot quality inspection and testing platform, continuously improve the testing capabilities of components, spare parts and complete machines, build professional testing platforms for safety and emergency applications, and improve the robot testing and certification service system.

　　(2) Cultivate and expand market players.

　　1. Cultivate high-quality robot enterprises. Focus on medical health, collaboration, logistics robots and other fields, support head enterprises to become bigger and stronger, introduce 1-2 world-class robot enterprises, drive upstream and downstream enterprises in the industrial chain to gather and develop, and build large-scale industrial clusters. For special robots, key components and other fields, we will support and promote a number of innovative enterprises with high growth expectations to become better and stronger, and cultivate a number of "little giants" and unicorn enterprises with global influence.

　　2. Cultivate emerging formats of robots. Encourage powerful enterprises to expand their business models and carry out robot financial leasing business for the national market. Promote enterprises to expand post-robot market services such as maintenance, second-hand trading and remanufacturing, encourage enterprises to provide derivative services such as robot information services and remote operation and maintenance, and cultivate new models and formats of robot industry.

　　Sixth, gather and develop, optimize the spatial layout of robot industry

　　Based on the optimization of industrial organization and the cooperation of industrial chain, we will promote the docking and integration of robot innovation chain and industrial chain, the efficient matching of industrial layout and regional resources, accelerate the construction of a demonstration zone combining robot production with research and a cluster zone combining production with use, and comprehensively enhance the role of robot industry in attracting and gathering internally and radiating externally.

　　(A) to create a demonstration zone for the integration of robot production and research in the north.

　　Give full play to the advantages of Zhongguancun Science City in gathering innovative resources, and support Haidian District to create an international leading enterprise incubation and innovation and entrepreneurship ecology with robot originality and cutting-edge technological innovation as the guide. Give full play to the advantages of industrial location and talent gathering, support Changping District to take the transformation of Zhongguancun robot innovation achievements as the guide, introduce robot technology-based small and medium-sized enterprises and unicorn enterprises, focus on undertaking cutting-edge technology industrialization and platform construction projects, and optimize the transfer and transformation ecology of robot innovation achievements.

　　(B) the construction of southern robot production and use of a combination of gathering areas.

　　Give full play to the scale advantage of the main position of high-tech industries, support Beijing Economic and Technological Development Zone to take the layout of the whole industrial chain of robots as the guide, introduce world-class robot quality enterprises, focus on undertaking major industrialization projects in the city, and build a comprehensive gathering area of robot industry. Give full play to the advantages of characteristic industrial agglomeration, support Fengtai and other districts to focus on special robots and other fields, and build a characteristic park combining the production and use of robots in sub-industries.

　　(3) Promote the coordinated development of the robot industry in Beijing, Tianjin and Hebei

　　Give full play to the advantages of Beijing-Tianjin-Hebei industrial synergy policy, support robot head enterprises to give full play to the advantages of industrial chain, and guide the layout of upstream and downstream supporting enterprises in Tianjin and Hebei. Enterprises headquartered in Beijing and producing in Tianjin and Hebei are encouraged to realize the docking of production resources and the coordination of production processes by building industrial internet platforms and "parent-child factories" to enhance the integration ability of industrial chains and supply chains.

　　VII. Safeguard measures

　　(1) Do a good job in organizational guarantee.

　　Strengthen the docking with national ministries and commissions, actively undertake major national special projects and key research and development plans, and strive for more national-level projects to be laid out in Beijing. Improve the working mechanism of the robot industry in this city, strengthen the overall coordination between various departments and districts, and form a joint effort. Set up a robot expert think tank to carry out forward-looking and strategic research on major issues.

　　(2) Formulating special policies

　　The city and district jointly formulate special policies for the robot industry. Using the policies of high-tech industrial development funds and the first set, we will study ways to support the construction of innovative carriers, the development of innovative products, and the demonstration of application scenarios through discount loans for key investment projects, application incentives for new technologies and new products, and government purchase of services. Give play to the role of government guidance fund, encourage social capital to participate in the incubation and industrialization investment of robot innovation achievements in this city, and support financial institutions to provide personalized credit and financing services for robot enterprises.

　　(3) Strengthen personnel training

　　Using the high-tech industrial talent policy, we will increase the introduction and training of high-end talents and high-level teams of world-class robots. Closely meet the needs of enterprises, strengthen the skills training of on-the-job personnel, and smooth the channels for the declaration of professional titles of enterprise personnel. Support robot enterprises, universities and colleges to cooperate in the construction of training bases and joint scientific research bases, and cultivate engineering and technical talents, management talents and compound talents urgently needed by enterprises.

　　(4) Promoting coordination between the central and local governments.

　　Support central enterprises and subordinate colleges and universities to build a robot collaborative research and development platform and a production-education integration base in Beijing, deeply participate in the robot scene construction in this city, guide a number of innovative achievements to be transferred and transformed in Beijing, and promote a number of major projects to land in Beijing. Support local enterprises to participate in the industrial chain of central enterprises and the construction of innovation chain, and promote the ecological integration and development of robot industry in the central region.

　　(V) Deepening exchanges and cooperation.

　　Run the World Robotics Congress well, organize diversified activities such as policy publicity, innovation exhibition and innovation competition, and build a world-class platform for exchanges and cooperation in the robotics industry. Encourage domestic and foreign enterprises to set up robot function headquarters, research and development institutions and training institutions in Beijing. Make full use of domestic and foreign markets and resources to support the robot products and services in this city to "go global".

　　(six) to carry out industrial monitoring.

　　Give play to the role of industry organizations and professional institutions to strengthen the operation and dynamic monitoring of the robot industry. Establish a normal communication mechanism with key enterprises, universities and colleges, timely grasp the progress of innovative product development, major project implementation, major policy implementation, timely optimize and adjust support measures, and create a good development environment.

According to Securities Star, as of the close of May 8, 2025, Midea Group (000333) closed at 75.0 yuan, up 0.86%, with a turnover rate of 0.4%, with a turnover of 277,100 lots and a turnover of 2.081 billion yuan.

As for the data of capital flow on May 8, the net outflow of main funds was 52.8649 million yuan, accounting for 2.54% of the total turnover, the net inflow of hot money was 147 million yuan, accounting for 7.05% of the total turnover, and the net outflow of retail funds was 93.8058 million yuan, accounting for 4.51% of the total turnover.

Midea Group’s first quarterly report in 2025 showed that the company’s main income was 128.428 billion yuan, up 20.61% year-on-year; The net profit of returning to the mother was 12.422 billion yuan, up 38.02% year-on-year; Deducting non-net profit was 12.75 billion yuan, up 38.03% year-on-year; The debt ratio is 6.194%, the investment income is 534 million yuan, the financial expenses are-2.84 billion yuan, and the gross profit margin is 25.45%. Midea Group (000333) is mainly engaged in smart home, new energy and industrial technology, intelligent building technology, robotics and automation, health care and smart logistics.

In the last 90 days, the stock has been rated by 26 institutions, with 23 buy ratings and 3 overweight ratings. The average target price of institutions in the past 90 days was 88.07.

Explanation of the term "capital flow": refers to the reversal of capital flow through price changes. When the stock price is in a rising state, the turnover formed by active buying orders is the driving force for the stock price to rise, which is defined as capital inflow, and when the stock price is in a falling state, the turnover generated by active selling orders is the driving force for the stock price to fall, which is defined as capital outflow. The difference between the two forces on that day is the net force left to push the stock price up after the two forces offset each other on that day. Calculate the main capital flow, hot money flow and retail capital flow through the transaction amount of each transaction.

Note: The main funds are large single transactions, the hot money is large single transactions, and the retail investors are small and medium single transactions.

The above content is compiled according to the public information of Securities Star, which is generated by AI algorithm (net letter calculation No.310104345710301240019), and does not constitute investment advice.

CCTV News:The press conference of the Fourth Session of the 13th Chinese People’s Political Consultative Conference was held at 15: 00 on March 3rd. Guo Weimin, spokesman of the conference, introduced the situation of the conference to Chinese and foreign media and answered questions from reporters.

A reporter asked: when everyone thinks that mobile phones are convenient for life, the elderly are faced with mobile phone problems, such as being unable to enter public places because they can’t use health codes. How to make the elderly enjoy happiness in the intelligent age? What opinions and suggestions do CPPCC members have?

Guo Weimin said that this year, Chinese People’s Political Consultative Conference will actively respond to the aging population and promote the balanced development of the population, and will organize CPPCC members to conduct in-depth research and discussion to provide reference for government decision-making. Members hope that the whole society will take action and actively provide convenience for the elderly. At the same time, they hope that young people can communicate with the elderly and help the elderly enter the smart circle and integrate into modern life. "Members believe that there is no shortage of intelligent times."

　

The 2024 Beijing Auto Show officially opened the public day today. I believe many friends have planned to go to the scene to enjoy the car. And friends who plan to change cars in the near future should pay attention. If you are not careful, you may miss the fixed subsidy of 10,000 yuan!

Recently, the Ministry of Commerce, the Ministry of Finance and other seven ministries and commissions jointly issued the Detailed Rules for the Implementation of Automobile Trade-in Subsidies (hereinafter referred to as the Detailed Rules), which clarified the subsidy policy for automobile trade-in funds.

The scope and standards of subsidies are defined in the Detailed Rules: from the date of issuance of the Detailed Rules to December 31, 2024, individual consumers who scrap fuel passenger cars with national emission standards of Class III and below or new energy passenger cars registered before April 30, 2018, and buy new passenger cars that meet the energy-saving requirements, can enjoy a one-time fixed subsidy. Among them, those who scrap the above two types of old passenger cars and buy qualified new energy passenger cars will be subsidized by 10 thousand yuan; A subsidy of 7,000 yuan will be given to scrapped passenger cars with national emission standards of Class III and below (gasoline passenger cars registered before June 30, 2011, diesel passenger cars registered before June 30, 2013 and passenger cars with other fuel types) and purchased passenger cars with a displacement of 2.0 liters and below.

The specific application process of subsidies is as follows: individual consumers who intend to apply for automobile trade-in subsidies should fill in the application materials by logging into the website of the national automobile circulation information management system or the "automobile trade-in" applet before January 10, 2025, and the relevant materials should be obtained from the date of issuance of the Detailed Rules to December 31, 2024.

At the same time, consumers and friends need to pay attention, and the detailed rules clarify the requirements for supervision and management: relevant local departments should do a good job in subsidizing the old-for-new vehicles according to their duties and strengthen supervision and management. All localities shall not require that scrapped cars be sold to designated enterprises, and shall not set up a list of subsidies or enterprises with regional and technical product orientation. All localities should set up a telephone hotline for car trade-in, respond to public demands in time, and accept social supervision. Friends who want to get subsidies should call the hotline for detailed consultation before replacement, and beware of people with ulterior motives taking the opportunity to cheat.

Just after the "Rules" were officially released, we learned from the automobile official that Hongqi Automobile actively responded to the "Rules" and became the brand that started the first shot of "trade-in" this year, showing its "eldest son" demeanor.

According to sources, on the night when the Rules were officially announced, Hongqi announced the latest policies overnight, covering the best-selling models such as,,, Hongqi HQ9, and so on. The maximum subsidy can reach 50,000 yuan, and the implementation period is from April 27th to June 30th.

Let’s take a look at the specific replacement/scrapping subsidy policies for each model.

Red Flag H5/ Red Flag HS5

Hongqi H5 positioning medium-sized car, the appearance continues the family-style design, and the overall shape is very simple. The length, width and height are 4988/1875/1470mm respectively, and the wheelbase is 2920 mm. In terms of power, 1.5T, 2.0T and 1.5T HEV versions are available.

Hongqi HS5 locates a medium-sized SUV, which strengthens the sense of muscle and movement as an SUV while maintaining the family-style design. The length, width and height are 4785/1905/1700mm respectively, and the wheelbase is 2870 mm. In terms of power, the whole system comes standard with a 2.0T engine, providing two-wheel drive and four-wheel drive models for consumers to choose from.

Replacement/scrapping subsidy policy: 10,000 yuan/set for non-Hongqi brand vehicles and 12,000 yuan/set for Hongqi brand vehicles.

Hongqi H6/ Hongqi HS3

As a B+-class luxury fashion car carried by Hongqi brand, Hongqi H6 is less serious and more fashionable and sporty than Hongqi H5 on the same platform, and it is a very individual model among Hongqi brands. The length, width and height are 4990/1880/1455mm respectively, and the wheelbase is 2920 mm. In terms of power, Hongqi H6 is equipped with a high-low power 2.0T engine, with a high-power version of 185kW, a peak torque of 380N·m, and an acceleration of 6.8 seconds per 100 kilometers.

Hongqi HS3 is the first compact SUV of Hongqi brand, focusing on the young consumer market. The overall modeling of Hongqi HS3 not only continues the family design, but also adds more designs that young people like, making the overall style more personalized. In terms of size, although the compact SUV is positioned, it is not small, with a length, width and height of 4655/1900/1668mm and a wheelbase of 2770mm respectively. In terms of power, Hongqi HS3 is equipped with 1.5T and 2.0T powertrains, matching with 7-speed dual clutch and 8-speed automatic manual transmission.

Replacement/scrapping subsidy policy: 8,000 yuan/set for non-Hongqi brand vehicles and 10,000 yuan/set for Hongqi brand vehicles.

Hongqi EH7

Hongqi EH7 is the first model launched after the independent operation of Hongqi New Energy Sub-brand, which is based on the new FMEs "Flag" super architecture. Hongqi EH7 is positioned as a medium-sized and large-sized pure electric car, adopting the brand’s latest design language, and its overall shape has great visual impact. In terms of body size, the length, width and height of the new car are 4980/1915/1490mm and the wheelbase is 3000mm respectively.

Red Flag EH7′ s interior dual screen and polygonal steering wheel create a strong scientific and technological atmosphere. In the configuration part, the new car is equipped with a 6-inch +15.5-inch curved double screen design, and also equipped with an AR HUD head-up display system. The car uses Snapdragon 8155 chip.

Replacement/scrapping subsidy policy: 10,000 yuan/set for non-Hongqi brand vehicles and 20,000 yuan/set for Hongqi brand vehicles.

Hongqi HQ9

At this year’s Beijing Auto Show, 2024 models were officially listed, and the price range was 358,800-538,800 yuan. Among them, the new PHEV model is equipped with a plug-in hybrid system consisting of a 2.0T engine and front and rear dual motors. 210kW, peak torque 440 n m. The official comprehensive fuel consumption per 100 kilometers is 2.4L, and the acceleration time per 100 kilometers is 8.3s.

It is basically consistent with the fuel version on sale in terms of modeling. The vehicle charging interface is located above the left rear tire, and the tail PHEV logo proves its identity as a new energy vehicle.

In terms of interior design, at first glance, the new car feels more stable and luxurious. The floating central control large screen will integrate many practical functions, and the three-piece style will be decorated with chrome trim strips, plus a large area of leather packaging and wooden decorative boards, thus creating a comfortable and luxurious interior atmosphere.

Replacement/scrapping subsidy policy: the subsidy for non-Hongqi brand vehicles in non-restricted areas is 10,000 yuan/set, the subsidy for non-Hongqi brand vehicles in restricted areas is 13,000 yuan/set, the subsidy for Hongqi brand vehicles is 50,000 yuan/set, and the subsidy for FAW passenger car brands is 30,000 yuan/set, and even some brand vehicles have replacement subsidies as high as 20,000-50,000 yuan.

Editor’s comment:

The opening year of China automobile market in 2024 was the news of successive price reductions by major brands, and now the Detailed Rules jointly issued by seven ministries and commissions further stimulated the market. However, as of the time of publication of this article, we have not received any news that other brands have entered a new round of subsidies, which shows that Hongqi Automobile has responded quickly to the policy. At the same time, the maximum subsidy of 50,000 yuan for all models can also be said to be rare in the industry. As the first luxury brand in its own brand, the market and consumers have a very high recognition of Hongqi, and this subsidy policy for Hongqi covers its best-selling models, which is an opportunity for consumers not to be missed. At the same time, we also look forward to the follow-up actions of other brands. After all, the promulgation of the Detailed Rules is good news for consumers and manufacturers.